rust-bitcoin-unsafe-fast/src/network/message_network.rs

211 lines
7.1 KiB
Rust
Raw Normal View History

2014-07-18 13:56:17 +00:00
// Rust Bitcoin Library
// Written in 2014 by
// Andrew Poelstra <apoelstra@wpsoftware.net>
2014-07-18 13:56:17 +00:00
//
// To the extent possible under law, the author(s) have dedicated all
// copyright and related and neighboring rights to this software to
// the public domain worldwide. This software is distributed without
// any warranty.
//
// You should have received a copy of the CC0 Public Domain Dedication
// along with this software.
// If not, see <http://creativecommons.org/publicdomain/zero/1.0/>.
//
//! Bitcoin network-related network messages.
2014-07-18 13:56:17 +00:00
//!
//! This module defines network messages which describe peers and their
//! capabilities.
2014-07-18 13:56:17 +00:00
//!
use crate::prelude::*;
use crate::io;
2019-12-03 22:39:04 +00:00
use crate::network::address::Address;
use crate::network::constants::{self, ServiceFlags};
use crate::consensus::{Encodable, Decodable, ReadExt};
use crate::consensus::encode;
use crate::hashes::sha256d;
2014-07-18 13:56:17 +00:00
/// Some simple messages
/// The `version` message
2015-03-26 15:35:31 +00:00
#[derive(PartialEq, Eq, Clone, Debug)]
2014-07-18 13:56:17 +00:00
pub struct VersionMessage {
/// The P2P network protocol version
pub version: u32,
/// A bitmask describing the services supported by this node
2019-11-22 11:00:48 +00:00
pub services: ServiceFlags,
/// The time at which the `version` message was sent
pub timestamp: i64,
/// The network address of the peer receiving the message
pub receiver: Address,
/// The network address of the peer sending the message
pub sender: Address,
/// A random nonce used to detect loops in the network
pub nonce: u64,
/// A string describing the peer's software
pub user_agent: String,
2019-01-23 18:30:32 +00:00
/// The height of the maximum-work blockchain that the peer is aware of
pub start_height: i32,
/// Whether the receiving peer should relay messages to the sender; used
/// if the sender is bandwidth-limited and would like to support bloom
2019-11-19 22:58:49 +00:00
/// filtering. Defaults to false.
pub relay: bool
2014-07-18 13:56:17 +00:00
}
impl VersionMessage {
2019-12-11 07:25:20 +00:00
/// Constructs a new `version` message with `relay` set to false
pub fn new(
2019-11-22 11:00:48 +00:00
services: ServiceFlags,
timestamp: i64,
receiver: Address,
sender: Address,
nonce: u64,
user_agent: String,
start_height: i32,
) -> VersionMessage {
VersionMessage {
version: constants::PROTOCOL_VERSION,
services,
timestamp,
receiver,
sender,
nonce,
user_agent,
start_height,
relay: false,
}
2014-07-18 13:56:17 +00:00
}
}
impl_consensus_encoding!(VersionMessage, version, services, timestamp,
receiver, sender, nonce,
user_agent, start_height, relay);
2014-07-18 13:56:17 +00:00
2019-08-27 11:01:21 +00:00
/// message rejection reason as a code
#[derive(PartialEq, Eq, Clone, Copy, Debug)]
2019-08-27 11:01:21 +00:00
pub enum RejectReason {
/// malformed message
Malformed = 0x01,
2019-08-27 11:01:21 +00:00
/// invalid message
Invalid = 0x10,
2019-08-27 11:01:21 +00:00
/// obsolete message
Obsolete = 0x11,
2019-08-27 11:01:21 +00:00
/// duplicate message
Duplicate = 0x12,
2019-08-27 11:01:21 +00:00
/// nonstandard transaction
NonStandard = 0x40,
2019-09-21 11:31:03 +00:00
/// an output is below dust limit
Dust = 0x41,
2019-08-27 11:01:21 +00:00
/// insufficient fee
Fee = 0x42,
2019-08-27 11:01:21 +00:00
/// checkpoint
Checkpoint = 0x43
2019-08-27 11:01:21 +00:00
}
impl Encodable for RejectReason {
Take Writer/Reader by `&mut` in consensus en/decoding Fix #1020 (see more relevant discussion there) This definitely makes the amount of generics compiler has to generate by avoding generating the same functions for `R`, &mut R`, `&mut &mut R` and so on. old: ``` > ls -al target/release/deps/bitcoin-07a9dabf1f3e0266 -rwxrwxr-x 1 dpc dpc 9947832 Jun 2 22:42 target/release/deps/bitcoin-07a9dabf1f3e0266 > strip target/release/deps/bitcoin-07a9dabf1f3e0266 > ls -al target/release/deps/bitcoin-07a9dabf1f3e0266 -rwxrwxr-x 1 dpc dpc 4463024 Jun 2 22:46 target/release/deps/bitcoin-07a9dabf1f3e0266 ``` new: ``` > ls -al target/release/deps/bitcoin-07a9dabf1f3e0266 -rwxrwxr-x 1 dpc dpc 9866800 Jun 2 22:44 target/release/deps/bitcoin-07a9dabf1f3e0266 > strip target/release/deps/bitcoin-07a9dabf1f3e0266 > ls -al target/release/deps/bitcoin-07a9dabf1f3e0266 -rwxrwxr-x 1 dpc dpc 4393392 Jun 2 22:45 target/release/deps/bitcoin-07a9dabf1f3e0266 ``` In the unit-test binary itself, it saves ~100KB of data. I did not expect much performance gains, but turn out I was wrong(*): old: ``` test blockdata::block::benches::bench_block_deserialize ... bench: 1,072,710 ns/iter (+/- 21,871) test blockdata::block::benches::bench_block_serialize ... bench: 191,223 ns/iter (+/- 5,833) test blockdata::block::benches::bench_block_serialize_logic ... bench: 37,543 ns/iter (+/- 732) test blockdata::block::benches::bench_stream_reader ... bench: 1,872,455 ns/iter (+/- 149,519) test blockdata::transaction::benches::bench_transaction_deserialize ... bench: 136 ns/iter (+/- 3) test blockdata::transaction::benches::bench_transaction_serialize ... bench: 51 ns/iter (+/- 8) test blockdata::transaction::benches::bench_transaction_serialize_logic ... bench: 5 ns/iter (+/- 0) test blockdata::transaction::benches::bench_transaction_size ... bench: 3 ns/iter (+/- 0) ``` new: ``` test blockdata::block::benches::bench_block_deserialize ... bench: 1,028,574 ns/iter (+/- 10,910) test blockdata::block::benches::bench_block_serialize ... bench: 162,143 ns/iter (+/- 3,363) test blockdata::block::benches::bench_block_serialize_logic ... bench: 30,725 ns/iter (+/- 695) test blockdata::block::benches::bench_stream_reader ... bench: 1,437,071 ns/iter (+/- 53,694) test blockdata::transaction::benches::bench_transaction_deserialize ... bench: 92 ns/iter (+/- 2) test blockdata::transaction::benches::bench_transaction_serialize ... bench: 17 ns/iter (+/- 0) test blockdata::transaction::benches::bench_transaction_serialize_logic ... bench: 5 ns/iter (+/- 0) test blockdata::transaction::benches::bench_transaction_size ... bench: 4 ns/iter (+/- 0) ``` (*) - I'm benchmarking on a noisy laptop. Take this with a grain of salt. But I think at least it doesn't make anything slower. While doing all this manual labor that will probably generate conflicts, I took a liberty of changing generic type names and variable names to `r` and `R` (reader) and `w` and `W` for writer.
2022-06-03 04:50:42 +00:00
fn consensus_encode<W: io::Write>(&self, w: &mut W) -> Result<usize, io::Error> {
w.write_all(&[*self as u8])?;
2019-08-27 11:01:21 +00:00
Ok(1)
}
}
impl Decodable for RejectReason {
Take Writer/Reader by `&mut` in consensus en/decoding Fix #1020 (see more relevant discussion there) This definitely makes the amount of generics compiler has to generate by avoding generating the same functions for `R`, &mut R`, `&mut &mut R` and so on. old: ``` > ls -al target/release/deps/bitcoin-07a9dabf1f3e0266 -rwxrwxr-x 1 dpc dpc 9947832 Jun 2 22:42 target/release/deps/bitcoin-07a9dabf1f3e0266 > strip target/release/deps/bitcoin-07a9dabf1f3e0266 > ls -al target/release/deps/bitcoin-07a9dabf1f3e0266 -rwxrwxr-x 1 dpc dpc 4463024 Jun 2 22:46 target/release/deps/bitcoin-07a9dabf1f3e0266 ``` new: ``` > ls -al target/release/deps/bitcoin-07a9dabf1f3e0266 -rwxrwxr-x 1 dpc dpc 9866800 Jun 2 22:44 target/release/deps/bitcoin-07a9dabf1f3e0266 > strip target/release/deps/bitcoin-07a9dabf1f3e0266 > ls -al target/release/deps/bitcoin-07a9dabf1f3e0266 -rwxrwxr-x 1 dpc dpc 4393392 Jun 2 22:45 target/release/deps/bitcoin-07a9dabf1f3e0266 ``` In the unit-test binary itself, it saves ~100KB of data. I did not expect much performance gains, but turn out I was wrong(*): old: ``` test blockdata::block::benches::bench_block_deserialize ... bench: 1,072,710 ns/iter (+/- 21,871) test blockdata::block::benches::bench_block_serialize ... bench: 191,223 ns/iter (+/- 5,833) test blockdata::block::benches::bench_block_serialize_logic ... bench: 37,543 ns/iter (+/- 732) test blockdata::block::benches::bench_stream_reader ... bench: 1,872,455 ns/iter (+/- 149,519) test blockdata::transaction::benches::bench_transaction_deserialize ... bench: 136 ns/iter (+/- 3) test blockdata::transaction::benches::bench_transaction_serialize ... bench: 51 ns/iter (+/- 8) test blockdata::transaction::benches::bench_transaction_serialize_logic ... bench: 5 ns/iter (+/- 0) test blockdata::transaction::benches::bench_transaction_size ... bench: 3 ns/iter (+/- 0) ``` new: ``` test blockdata::block::benches::bench_block_deserialize ... bench: 1,028,574 ns/iter (+/- 10,910) test blockdata::block::benches::bench_block_serialize ... bench: 162,143 ns/iter (+/- 3,363) test blockdata::block::benches::bench_block_serialize_logic ... bench: 30,725 ns/iter (+/- 695) test blockdata::block::benches::bench_stream_reader ... bench: 1,437,071 ns/iter (+/- 53,694) test blockdata::transaction::benches::bench_transaction_deserialize ... bench: 92 ns/iter (+/- 2) test blockdata::transaction::benches::bench_transaction_serialize ... bench: 17 ns/iter (+/- 0) test blockdata::transaction::benches::bench_transaction_serialize_logic ... bench: 5 ns/iter (+/- 0) test blockdata::transaction::benches::bench_transaction_size ... bench: 4 ns/iter (+/- 0) ``` (*) - I'm benchmarking on a noisy laptop. Take this with a grain of salt. But I think at least it doesn't make anything slower. While doing all this manual labor that will probably generate conflicts, I took a liberty of changing generic type names and variable names to `r` and `R` (reader) and `w` and `W` for writer.
2022-06-03 04:50:42 +00:00
fn consensus_decode<R: io::Read>(r: &mut R) -> Result<Self, encode::Error> {
Ok(match r.read_u8()? {
0x01 => RejectReason::Malformed,
0x10 => RejectReason::Invalid,
0x11 => RejectReason::Obsolete,
0x12 => RejectReason::Duplicate,
0x40 => RejectReason::NonStandard,
0x41 => RejectReason::Dust,
0x42 => RejectReason::Fee,
0x43 => RejectReason::Checkpoint,
_ => return Err(encode::Error::ParseFailed("unknown reject code"))
2019-08-27 11:01:21 +00:00
})
}
}
/// Reject message might be sent by peers rejecting one of our messages
#[derive(PartialEq, Eq, Clone, Debug)]
pub struct Reject {
/// message type rejected
pub message: Cow<'static, str>,
2019-08-27 11:01:21 +00:00
/// reason of rejection as code
pub ccode: RejectReason,
/// reason of rejectection
2019-12-03 22:39:04 +00:00
pub reason: Cow<'static, str>,
2019-08-27 11:01:21 +00:00
/// reference to rejected item
pub hash: sha256d::Hash
}
impl_consensus_encoding!(Reject, message, ccode, reason, hash);
#[cfg(test)]
mod tests {
use super::VersionMessage;
use super::Reject;
use super::RejectReason;
use crate::hashes::hex::FromHex;
use crate::hashes::sha256d::Hash;
use crate::network::constants::ServiceFlags;
use crate::consensus::encode::{deserialize, serialize};
#[test]
fn version_message_test() {
// This message is from my satoshi node, morning of May 27 2014
2020-01-08 17:02:30 +00:00
let from_sat = Vec::from_hex("721101000100000000000000e6e0845300000000010000000000000000000000000000000000ffff0000000000000100000000000000fd87d87eeb4364f22cf54dca59412db7208d47d920cffce83ee8102f5361746f7368693a302e392e39392f2c9f040001").unwrap();
let decode: Result<VersionMessage, _> = deserialize(&from_sat);
assert!(decode.is_ok());
let real_decode = decode.unwrap();
assert_eq!(real_decode.version, 70002);
assert_eq!(real_decode.services, ServiceFlags::NETWORK);
assert_eq!(real_decode.timestamp, 1401217254);
// address decodes should be covered by Address tests
assert_eq!(real_decode.nonce, 16735069437859780935);
assert_eq!(real_decode.user_agent, "/Satoshi:0.9.99/".to_string());
assert_eq!(real_decode.start_height, 302892);
assert!(real_decode.relay);
assert_eq!(serialize(&real_decode), from_sat);
}
#[test]
fn reject_message_test() {
let reject_tx_conflict = Vec::from_hex("027478121474786e2d6d656d706f6f6c2d636f6e666c69637405df54d3860b3c41806a3546ab48279300affacf4b88591b229141dcf2f47004").unwrap();
let reject_tx_nonfinal = Vec::from_hex("02747840096e6f6e2d66696e616c259bbe6c83db8bbdfca7ca303b19413dc245d9f2371b344ede5f8b1339a5460b").unwrap();
let decode_result_conflict: Result<Reject, _> = deserialize(&reject_tx_conflict);
let decode_result_nonfinal: Result<Reject, _> = deserialize(&reject_tx_nonfinal);
assert!(decode_result_conflict.is_ok());
assert!(decode_result_nonfinal.is_ok());
let conflict = decode_result_conflict.unwrap();
assert_eq!("tx", conflict.message);
assert_eq!(RejectReason::Duplicate, conflict.ccode);
assert_eq!("txn-mempool-conflict", conflict.reason);
assert_eq!(
Hash::from_hex("0470f4f2dc4191221b59884bcffaaf00932748ab46356a80413c0b86d354df05").unwrap(),
conflict.hash
);
let nonfinal = decode_result_nonfinal.unwrap();
assert_eq!("tx", nonfinal.message);
assert_eq!(RejectReason::NonStandard, nonfinal.ccode);
assert_eq!("non-final", nonfinal.reason);
assert_eq!(
Hash::from_hex("0b46a539138b5fde4e341b37f2d945c23d41193b30caa7fcbd8bdb836cbe9b25").unwrap(),
nonfinal.hash
);
assert_eq!(serialize(&conflict), reject_tx_conflict);
assert_eq!(serialize(&nonfinal), reject_tx_nonfinal);
}
2014-07-18 13:56:17 +00:00
}