Remove broken/blocking coreboot/heads build support

Makefile

@@ -2,7 +2,6 @@ NAME := airgap
 IMAGE := local/$(NAME):latest
 ARCH := x86_64
 TARGET := $(ARCH)
-DEVICES := librem_13v4 librem_15v4
 USER := $(shell id -u):$(shell id -g)
 CPUS := $(shell docker run -it debian nproc)
 GIT_REF := $(shell git log -1 --format=%H config)
@@ -53,20 +52,13 @@ mrproper:
 	docker image rm -f $(IMAGE)
 	rm -rf $(CACHE_DIR) $(OUT_DIR)
 
-.PHONY: build-fw
-build-fw: $(CACHE_DIR)/toolchain.tar
-	$(call toolchain,$(USER),"build-fw")
-	mkdir -p $(RELEASE_DIR)
-	for device in $(DEVICES); do \
-		cp \
-			$(CACHE_DIR)/heads/build/$${device}/pureboot*.rom \
-			$(RELEASE_DIR)/$${device}.rom ; \
-	done
-
 ## Release Targets
 
 .PHONY: release
-release: | out/release.env out/airgap.iso out/manifest.txt
+release: | \
+	$(OUT_DIR)/release.env \
+	$(OUT_DIR)/airgap.iso \
+	$(OUT_DIR)/manifest.txt
 	mkdir -p $(RELEASE_DIR)
 	cp out/release.env $(RELEASE_DIR)/release.env
 	cp out/airgap.iso $(RELEASE_DIR)/airgap.iso
@@ -200,7 +192,7 @@ $(OUT_DIR)/airgap.iso: \
     	cd buildroot; \
     	make "airgap_$(TARGET)_defconfig"; \
 		unset FAKETIME; \
-    	make source; \
+		make source; \
 		make; \
 	")
 	mkdir -p $(OUT_DIR)
@@ -271,7 +263,6 @@ define toolchain
 		--env FAKETIME=$(FAKETIME) \
 		--env BR2_EXTERNAL="/$(BR2_EXTERNAL)" \
 		--env HEADS_EXTERNAL="/$(HEADS_EXTERNAL)" \
-		--env DEVICES="$(DEVICES)" \
 		--env UID="$(shell id -u)" \
 		--env GID="$(shell id -g)" \
 		$(IMAGE) \

README.md

@@ -4,7 +4,7 @@
 
 ## About ##
 
-A live buildroot based distribution designed for managing secrets offline.
+A live buildroot based Liux distribution designed for managing secrets offline.
 
 Built for those of us that want to be -really- sure our most important secrets
 are managed in a clean environment with an "air gap" between us and the
@@ -18,19 +18,11 @@ internet with high integrity on the supply chain of the firmware and OS used.
  * Store/Restore BIP39 seed to a hardware wallet such as a Trezor or Ledger
 
 ## Features ##
- * Builds Coreboot-heads firmware for all supported devices for measured boot
+ * Determinsitic iso generation for multi-party code->binary verification
- * Determinsitic rom/iso generation for multi-party code->binary verification
  * Small footprint (< 100MB)
  * Immutable and Diskless: runs from initramfs
  * Network support and most drivers removed to minimize exfiltration vectors
 
-## Supported Devices ##
-
-  | Device      | TPM Model      | TPM Version | Remote Attestation  |
-  |-------------|:--------------:|:-----------:|:-------------------:|
-  | Librem13v4  | Infineon 9465  | 1.2         | HOTP via Nitrokey   |
-  | Librem15v4  | Infineon 9456  | 1.2         | HOTP via Nitrokey   |
-
 ## Requirements ##
 
 ### Software ###
@@ -39,14 +31,14 @@ internet with high integrity on the supply chain of the firmware and OS used.
 
 ### Hardware ###
 
-* Supported PC already running coreboot-heads
+* Recommended: PC running coreboot-heads
-  * Ensure any Wifi/Disk/Bluetooth/Audio devices are removed
+  * Allows for signed builds, and verification of signed sd card payloads
+  * Ensure any Wifi/Disk/Bluetooth/Audio devices are disabled/removed
 * Supported remote attestation key (Librem Key, Nitrokey, etc)
 * Supported GPG smartcard device (Yubikey, Ledger, Trezor, Librem Key, etc)
 * Blank flash drive
 * Blank SD card
 
-
 ## Build ##
 
 ### Build a new release
@@ -67,19 +59,15 @@ internet with high integrity on the supply chain of the firmware and OS used.
     make VERSION=1.0.0rc1 sign
     ```
 
-## Install ##
+## Setup ##
-
-1. Place contents of release/$VERSION folder on SD card
-2. Boot machine to Heads -> Options -> Flash/Update BIOS
-3. Flash firmware via "Flash the firmware with new ROM, erase settings"
-4. Insert external Remote attestation key and signing key when prompted
-6. Reboot and verify successful remote attestation
-7. Boot to shell: Options -> Recovery Shell
-8. Mount SD card
-9. Insert chosen GPG Smartcard device
-10. Sign target iso ```gpg --armor --detach-sign airgap*.iso```
-11. Reboot
 
+1. Insert external Remote attestation key and signing key when prompted
+2. Reboot and verify successful remote attestation
+3. Boot to shell: Options -> Recovery Shell
+4. Mount SD card
+5. Insert chosen GPG Smartcard device
+6. Sign target iso ```gpg --armor --detach-sign airgap*.iso```
+7. Reboot
 
 ## Usage ##